Your Professional Performance for the Removal of Efflorescence & Cement
Proteger Proshield HD Pre-Cleaner effortlessly removes cement & mortar residues with a fast effective formulation that is suitable for use on all acid resistant surfaces, both internally and externally.
Proteger Proshield Pre-Cleaner is a professional formulation that removes surface residues such as mortar and cement, gypsum plaster, encrusted and engrained dirt, rust as well as efflorescence, calcium and lime scale deposits. Can be used indoors and outdoors after the installation process or during construction. All surfaces must be acid resistant surfaces such as ceramic tiles, brick, clay and quarry tiles, concrete and similar natural stone.
Directions for Use:
1) Due to the nature of this product, it is very important to avoid skin and eye contact, and to not inhale any mist/vapour. ALWAYS WEAR APPROPRIATE PPE DURING APPLICATION.
2) First wet the surface, then apply Proteger Proshield HD Pre-Cleaner, neat or diluted with water up to 1:10. Dilution rate will be dependent on the extent of the contamination. Not suitable for acid sensitive surfaces such as enamel, zinc, chrome, stainless steel, polished marble and limestone, lacquers,
3) If used indoors ensure good ventilation during and after use, and ensure that no vapours remain in the room.
4) After the completed application, if the problem persists, it may be necessary to reapply the solution diluting to a stronger mix and working in smaller areas.
Always try Proteger Proshield HD Pre-Cleaner in an inconspicuous area prior to use. Avoid contact with clothes, material and fabrics as this will cause damage. Keep away from carpets and soft furnishings. Always wipe up spillages and rinse thoroughly with cold water.
Approx 10 to 40m2 per litre Depending on the extent and severity of the deposits and the preferred dilution rate.
Storage / Lifespan:
Close firmly after each use. Store out of direct sunlight, keep in original container only. Use within 6 months of opening.