Proteger ProShield Patio Colour Enhancer – Your Patio Colour Boosting Sealer
Proteger ProShield Patio Colour Enhancer is a quick drying outdoor sealer for all quality natural stone surfaces. It offers outstanding, durable protection whilst adding a colour enhancing finish to Patio & Paving.
Safe and easy to use, this sealer is 100% breathable allowing for vapour transmission from within the stone.
Proteger ProShield Patio Colour Enhancer is the ideal outdoor sealer for paving, patio & paths. Quick drying, the natural stone colours will be highly enhanced with a very durable matt finish. The advanced polymerised formula is 100% breathable allows full vapour transmission to avoid moisture issues.
Proteger ProShield Patio Colour Enhancer is a water-based impregnating sealer that creates a long-lasting colour enhanced finish on all types of outdoor porous natural
stone. Very easy to apply, it fully penetrates the stone to protect against water stains, organic soiling and algae growth.
Directions for Use:
1) Always perform a test in an inconspicuous area on-site to check suitability of product, prior to use – read these
instructions fully before application.
2) Before application the surface must be completely clean and dry, apply a light and even coat with a low pressure sprayer, natural fibre brush or sponge. DO NOT OVERAPPLY: any excess sealer must be completely removed from the surface after 20-30 minutes, failure to remove the excess will lead to an unwelcome tacky, shiny finish and/or patchiness.
3) Apply a second application approximately 45-60 minutes repeating the process. After application it is important that the stone surface is kept completely dry through the curing process, up to 72 hours. Any moisture or water left on the surface within this time may result in the sealer drying inconsistent showing hard to remove white patches.
PLEASE NOTE: Always test in an inconspicuous area first to determine the suitability. Application range: 5°c – 20°c. Areas not to be sealed must be protected with masking materials.
Apply undiluted, coverage up to 25m2/L per coat.
Dependant on surface texture and porosity.
Storage / Lifespan:
Close firmly after each use. Store out of direct sunlight, keep in original container only. Use within 6 months of opening.