PROTEGER ProShield Patio Sealer is a quick drying outdoor sealer for all quality natural stone surfaces. It offers outstanding, durable protection whilst adding a soft sheen. Safe and easy to use, this sealer is 100% breathable allowing for vapour transmission from within the stone.
Proteger ProShield Patio Sealer – Pro Sealing Performance
Proteger ProShield Patio Sealer is a quick drying outdoor sealer for all quality natural stone surfaces. It offers outstanding, durable protection whilst adding a soft sheen. Safe and easy to use, this sealer is 100% breathable allowing for vapour transmission from within the stone.
Proteger ProShield Patio Sealer is a high performance sealer for natural stone paving. Quick drying, creating a durable satin finish whilst delicately accentuating the natural hues of outdoor flagstones. The advanced polymerised formula is 100% breathable allows full vapour transmission to avoid moisture issues.
Proteger ProShield Patio Sealer is a water-based polymerised protective coating that creates a highly durable satin/ sheen finish on all types of outdoor natural stone. Very easy to apply, it is self levelling and penetrates the substrate to protect against oil and water-based stains.
Directions for Use:
1) Always perform a test in an inconspicuous area on-site to check suitability of product, prior to use – read these instructions fully before application.
2) The surface to be treated must be completely dry and clean. Apply Proteger Patio Sealer sparingly with a sponge, paint pad, brush or sprayer. Any excess, puddling or pooling of the sealer must be spread evenly over the surface before allowing to dry (failure to apply correctly may lead to stickiness and/or patches).
3) After 60-90 minutes check to see if the first application is dry and ready to receive a second coat. Repeat the process leaving at least 60 minutes before receiving light foot traffic.
Always test in an inconspicuous area first to determine the suitability. Application range: 5°c – 20°c. In colder conditions the drying time may be extended, do not walk upon or apply further coats until the sealer is completely dry.
Apply undiluted, coverage up to 20m2/L per coat. Coverage will vary depending on surface texture and porosity.
Storage / Lifespan:
Close firmly after each use. Store out of direct sunlight, keep in original container only. Use within 6 months of opening.
5 Litre, 25 Litre