From: £3.95

Rated 5.00 out of 5 based on 1 customer rating
(2 customer reviews)

Proteger ProShield Street Guard HD – come with a 7 Year Warranty and there is a reason why this product is used on so many prestigious locations throughout the UK. Available in 25L or 5L Tubs is an innovative and safe sealing solution providing stain resistance and mechanical protection for large scale, commercial, civil, streetscape and pedestrianised applications. Safe, VOC free, 100% vapour transmission with fast-track drying and class-leading abrasion resistance.

Clear
Compare

Proteger ProShield Street Guard HD – come with a 7 Year Warranty and there is a reason why this product is used on so many prestigious locations throughout the UK.

Professional Performance

Proteger Street Guard HD is an innovative and safe sealing solution providing stain resistance and mechanical protection for large scale, commercial, civil, streetscape and pedestrianised applications. Safe, VOC free, 100% vapour transmission with fast-track drying and class-leading abrasion resistance.

Proteger Street Guard HD is a safe, water based formulation specifically developed for sealing large scale commercial and civil pedestrian surfaces. Unrivalled sealing power with protection against water, oil and dirt stains.

Ultra durable water based 2 coat formulation specifically developed to provide impregnation and surface protection for heavy traffic stone surfaces. With zero VOCs and high performance nano-technology allowing full vapour transmission, this sealer has a fast track formula and fully cures within 4-6 hours.

Directions for Use:
1) Make sure surface area is clean and dry before application. Ensure sufficient ventilation if working indoors and do not use externally if temperature is below 5º C or above 20º C. ALWAYS WEAR APPROPRIATE PPE

DURING APPLICATION.

2) 1st coat (impregnation): Apply at a ratio of 150ml/m2 with a low pressure sprayer, natural fibre brush, paint pad or sponge until overall saturation of the stone surface. Within 10 minutes, check that the application has evenly covered the surface; make sure the solution is well distributed to allow for full, even absorption.

3) 2nd coat (surface protection): Apply wet on wet within 15 minutes of the first coat (while the stone is still wet inside), working in the opposite direction to the first application for a balanced, even finish at a reduced ratio of 100ml/m2. Make sure that the formulation is applied evenly and consistently.

4) Always allow a minimum of 2-3 hours drying time before limited footfall to ensure maximum long-term protection.

PLEASE NOTE:  We recommend that a small test area is done first to check suitability of the product for your project. Do not over apply the product during 2nd coat as this may lead to stickiness and/or patchiness.

Wear / Longevity: Under typical conditions Street Guard HD can achieve protection for up to 5 years – a top-up of the second coat
application may be required within that period.

Storage / Lifespan: Close firmly after each use. Store out of direct sunlight, keep in original container only. Use within 6 months of opening.

Weight 1 kg
Size

Sample Bottle 100ml, 5 Litre, 25 Litre

2 reviews for Proteger ProShield Street Guard HD

  1. Rated 5 out of 5

    admin

    The Three Stages To Cleaning & Sealing Your Patio At Home With Proteger Proshield (DIY)
    STAGE ONE:

    Pre Clean your patio area. This can be done with cold pressure washing but will need treating with Noir Wash to kill off all spores within the stone that aren’t affected by cold water alone. You can also steam the surface if this is an option

    STAGE TWO:

    Allow the surface area to dry. Make sure it is free from any debris, leaf matter etc.

    STAGE THREE:

    Apply our StreetGuard HD Floor Sealer to the freshly cleaned surface. The water based impregnation sealer can be applied with a good quality hand sprayer (preferably with a lance) to atomise the liquid and give an even coat on the surface.

    Apply a good coverage (but don’t apply to thickly) and allow this to dry for 20 minutes or until tacky. THEN FOR THE MAGIC. Apply a second (lighter) coat to the pre treated area with the same HD StreetGuard. Our unique formulation creates a chemical reaction that will provide two layers of unrivalled protection to protect your stone, concrete,granite or sandstone flags. It will protect against traffic marks, spills from the odd glass of red wine and give the surface a new lease of life protecting your patio allowing you to enjoy those warm summer evenings.

  2. admin

    Question: Will Proteger ProShield Street Guard HD help prevent marking and protect paving slabs, crazy paving and embankments from Chewing Gum?

    Answers: Yes Proteger ProShield Street Guard HD makes Chewing Gum easier to remove and also prevents the animal fat in Gum marking the flags.

Add a review

Your email address will not be published. Required fields are marked (required)